Your cart

Your cart is empty

Continue shopping

RCB (ROUND CIRCULATING BALL BEARINGS)

Low friction hoisting and dousing of your mainsail.

The RCB system offers a radical solution to the problems with jamming sliders in an old mast. Basically, you fit a track on your mast and cars with Torlon ball bearings eliminate all that unnecessary friction you are so fed up with. The RCB track, which comes complete with screws and special nuts, is easy to fit on a Seldén E- or D-section. Just push the track into the original mast groove and tighten up. The attachment system is tailored to Seldén masts, but it will also fit those with a similar luff gap (approx. 6 mm or 1/4″). Other masts can be fitted with the track by screwing it directly in place.

39 Results

Clear all

39 Results

Clear all
Image Description

Double Spinnaker Pole Car, RCB30, 10° peak for bayonet inboard end, 1:1 purchase

£1,906.49

£1,906.49

Image Description

Double Spinnaker Pole Car, RCB30, 10° peak for bayonet inboard end, 1:1 purchase

£1,751.90

£1,751.90

Image Description

Double Spinnaker Pole Car, RCB30, 0° peak for bayonet inboard end, 1:1 purchase

£1,686.43

£1,686.43

Image Description

Complete set of RCB 22 tracks with connectors and fastenings - Length 12850 mm. For Seldén E- and D-sections

£1,387.39

£1,387.39

Image Description

Spinnaker Pole Car, RCB30, 10° peak for bayonet inboard end, 1:1 purchase

£1,000.79

£1,000.79

Complete set of RCB 22 tracks with connectors and fastenings - Length 10550 mm. For Seldén E- and D-sections

£875.35

£875.35

Spinnaker pole track, RCB 30 mm, 4800 mm, for radius R54 masts Seldén mast sections E274, E365, R290, F324, F305, C365, F370

£835.45

£835.45

Spinnaker pole track, RCB 30 mm, 4800 mm, for radius R38 masts.For Seldén mast sections R232, R260, C285, F286

£743.04

£743.04

Spinnaker pole track, RCB 30 mm, 4800 mm, for radius R38 mastsFor Seldén mast sections E170 D146, D160, R213, R235, C193-C264, F194-F265

£743.04

£743.04

Spinnaker pole track, RCB 30 mm, 3400 mm, for radius R54 masts Seldén mast sectionsE177, E189 E206, E224 E237, C321, C304

£654.78

£654.78

Image Description

Spinnaker Pole Car, RCB30, 10° peak for bayonet inboard end, 1:1 purchase

£623.48

£623.48

Image Description

Set of RCB 22 tracks excluding connectors and fastenings - Length 12850 mm. For installation on a non-Seldén mast

£608.52

£608.52

Spinnaker pole track, RCB 30 mm, 3400 mm, for radius R38 masts.For Seldén mast sections R232, R260, C285, F286

£606.92

£606.92

Spinnaker pole track, RCB 30 mm, 3400 mm, for radius R38 mastsFor Seldén mast sections E170 D146, D160 R213, R235, C193-C264, F194-F265.

£606.92

£606.92

Image Description

Spinnaker Pole Car, RCB30, 10° toggle for Vertical Pole Stowage, 1:1 purchase

£574.72

£574.72

Image Description

Spinnaker Pole slide for RCB 30 mm Track, 10° bracket for Vertical Pole Stowage, Toggle for composite pole end

£505.35

£505.35

Image Description

Spinnaker pole track, RCB 30 mm, 2400 mm, for radius R54 masts Seldén mast sectionsE177, E189 E206, E224 E237, C321, C304

£483.22

£483.22

Spinnaker pole track, RCB 30 mm, 3400 mm, for radius R38 mastsFor Seldén mast sections E170 D146, D160 R213, R235, C193-C264, F194-F265

£464.55

£464.55

Image Description

Spinnaker pole track, RCB 30 mm, 2400 mm, for radius R38 mastsFor Seldén mast sections E170 D146, D160 R213, R235, C193-C264,

£458.11

£458.11

Image Description

Spinnaker Pole Car, RCB30, 10° peak for bayonet inboard end, 2:1 purchase

£445.01

£445.01

Image Description

Spinnaker Pole Car, RCB30, 10° bracket, Excluding toggle, 1:1 purchase

£436.04

£436.04

Image Description

Spinnaker Pole slide for RCB 30 mm Track, 10° bracket for Vertical Pole Stowage, Bayonet fitting for Dip-gybe pole end fitting

£428.75

£428.75

Image Description

Spinnaker Pole Car, RCB30, 10° toggle for Vertical Pole Stowage, 2:1 purchase

£370.08

£370.08

Image Description

Spinnaker pole Ring slider with ø30 mm ring. For Seldén RCB30 track.

£359.04

£359.04

Image Description

Set of RCB 22 tracks excluding connectors and fastenings - Length 10550 mm. For installation on a non-Seldén mast

£288.63

£288.63

Image Description

RCB 22 track, Length 2300 mm, complete with fasteners for Seldén E- and D-sections.

£239.01

£239.01

Image Description

RCB 22, Headboard assembly - aluminium toggle with ø10 mm Drop-nose pin

£198.96

£198.96

Image Description

Set of fastenings for RCB 22 Gate track and end stops

£187.62

£187.62

Image Description

RCB 22 Track Gate kit with end stops

£155.02

£155.02

Image Description

Set of fastenings for 2300 mm RCB 22 track

£131.57

£131.57

Image Description

RCB 22 track, Length 2300 mm, excluding fasteners, for installation on non-Seldén masts

£122.43

£122.43

Image Description

RCB 22 car excluding fitting - used for RCB 22 fullbatten system

£110.49

£110.49

Image Description

M10 stud assembly for RCB 22 car

£92.81

£92.81

Image Description

Drop Nose Pin for RCB30, MDS68 and IWS68 Head Board Toggle, ø12x47

£59.44

£59.44

Extra set of fastenings for 2300 mm RCB 22 heavy duty installation

£45.10

£45.10

Image Description

Eye fitting for RCB 22 car

£33.26

£33.26

Image Description

Drop Nose Pin for RCB22 Head Board Toggle, ø10x42

£22.93

£22.93

Image Description

Locking fork, RCB 22

£6.03

£6.03

Image Description

Sliding insert for Spinnaker pole slider Type RCB30

£5.54

£5.54